Measuring
STEP FOUR: MEASURING
All measurements should be round up to the nearest 1/8″, 1/4", 1/2" or Whole Number (no 1/16" please)
Use a cloth tape to get us the length. Start from the top, at the very end of the metal frame, and follow the contour of the furniture's side rail, to the bottom end of the metal frame. Do not include the plastic of the end-caps in the measurment.
Make sure the measure tape does not slip!!
If you need to, secure the measure tape down at the top and middle of the frame with blue painters tape or similar.
"CONTACT US" if you have any Questions,
OR SEND PICTURES TO THE ADDRESS BELOW:
All measurements should be round up to the nearest 1/8″, 1/4", 1/2" or Whole Number (no 1/16" please)
Measure the Width, from Middle of the Track on one side, to Middle of the Track on the other side of the chair. Inside Track to Outside Track will also work. Remember to round up.
It is Best to Take the Measurements Where the Side Rails are Bolted to the Frame
Take Multiple Width measrments at the bolted in areas, to ensure straightness.
Here in the shop we are usually working on pieces that are between 17" and 21" wide.
Most slings are stable widths, but occasionally we work on tapered, and trapoiziodial sets.
These are more diffcult to make and install.
THIS NEXT PART IS VERY IMPORTANT
-All Sales Are Final
-Remember to Measure Twice
-Slings will be the size ordered and stretched to fit
-For Welded Frames, add a 1/4"
Thanks and Have a Great Day
"CONTACT US" if you have any Questions,
OR SEND PICTURES TO THE ADDRESS BELOW: